Standards

ITS9: CFP

December 8, 2010 Calibration

9th International Temperature Symposium Los Angeles / Disneyland CA, USA – March 19-23, 2012 The 9th International Temperature Symposium will be held in March of 2012, in conjunction with the Measurement Science Conference 2012, along with a combined technology exhibition. Sponsored by: Measurement Science Conference (MSC) (www.msc-conf.com) and the National Institute of Standards and Technology [...]

NIST Director Visits REOTEMP Instruments

November 23, 2010 Contact

San Diego, CA –- During a visit to Southern California, NIST Director Patrick Gallagher toured REOTEMP Instruments and met with company leaders about manufacturing innovation and competitiveness. In recent months, REOTEMP has undergone a Lean Manufacturing training program that was partially funded by the NIST Manufacturing Extension Partnership. Dr. Gallagher viewed many of the process [...]

Submission deadline extended | SPIE DSS & ThermoSense

November 2, 2010 Applications

Thermosense: Thermal Infrared Applications XXXIII Abstract due date extended to 8 November. Share your latest discoveries, build visibility for your work, and get immediate face-to-face feedback from leading experts in the field SPIE Defense Security & Sensing (DSS) 25 – 29 April 2011 Orlando World Center Marriott Resort & Convention Center Orlando, Florida,USA Conference DS101 [...]

DELTA® Mainline Certs Madgetech Loggers

September 26, 2010 Applications

MadgeTech We Build Data Loggers

MADGETECH DATA LOGGERS APPROVED FOR CARRIAGE ON DELTA® MAINLINE FLIGHTS Warner NH, USA — MadgeTech, Inc. is pleased to announce that Delta® has certified the following MadgeTech data loggers as being approved for carriage on Delta® Mainline Flights: – Cryo-Temp – MicroTemp – PRHTemp101 – PRHTemp110 – PRTemp101 – RHTemp1000IS – RHTemp101 – RHTemp110 – [...]

LAND TEMPERATURE CAL LAB

August 5, 2010 Calibration

40 YEARS OF WORLD-LEADING SERVICE DRONFIELD, ENGLAND, – -The Calibration Laboratory of Land Instruments International, the first thermal measurement laboratory to receive British Calibration Service (BCS) certification, celebrated its 40th anniversary on July 23, 2010. Initially established in 1970 to satisfy customer requirements for accurate temperature calibration, the Land Calibration Laboratory was the first accredited [...]

World’s Smallest Humidity Sensor

August 1, 2010 ICs

Sensirion’s SHT-21 digital sensor sets new standard OXFORD, UK–(BUSINESS WIRE)–RS Components has announced the exclusive launch of the world’s smallest digital humidity sensor, the Sensirion SHT-21. Samples of the ground-breaking 3 mm x 3 mm digital Relative Humidity and Temperature (RH&T) sensor are in stock at RS warehouses around the world now. “We are seeing [...]

Free Thermowell Calculator

July 30, 2010 News

New SwiftyCalc

Based on The 2010 ASME Thermowell Standard Statesville NC, USA – JMS Southeast has developed a program based on the New ASME PTC 10.9 TW – 2010 standard for thermowells that allows used to perform the calculations necessary to determine the suitability of their design for their process conditions with few complications. Just about any [...]

NEW ASME Thermowell Standard

July 29, 2010 Contact

This month the ASME 19.3 Committee released the new standard on thermowells, PTC 19.3 TW – 2010 Thermowells. It is available on their website at http://catalog.asme.org/Codes/PrintBook/PTC_193_TW_2010_Thermowells.cfm. From the page referenced above on the ASME Web site: Description ISBN #: 9780791833070 Published: 2010 Product Type: Print-Book No. of pages: 52 The object of this Standard is [...]

Environmental Simulator & Precision Temp Cycling System

July 27, 2010 Control

SP Scientific announces a new generation temperature control system for precise and reliable device testing and characterization, the ThermoJet ES. Stone Ridge NY, USA & Ipswich, UK – The ThermoJet ES has been designed to deliver controlled temperature air from -80 °C to +350 °C at air flow rates from 5 to 20 scfm. A [...]

New Test Laboratory by NTS Silicon Valley

July 14, 2010 Applications

Climatic, Environmental and Dynamics Testing Capabilities Added To Portfolio of Services Fremont CA, USA – National Technical Systems Inc. has announced the opening of a new custom-built Climatic, Environmental and Dynamics Product Testing Laboratory in close proximity to the company’s existing test laboratories in Silicon Valley, California. The new location is over 30,000 square feet, [...]

Vehicle Temperature Table

July 4, 2010 Bio-Medical

New, easy-to-use UGA temperature table may help reduce heat-related deaths of children in closed cars Athens GA, USA — A team of researchers at the University of Georgia (UGA) has developed an easy-to-use table of vehicle temperature changes (in closed cars during hot weather) that may help public officials and media remind the public about [...]

FLIR A-Series IR Cameras

June 21, 2010 Applications

The FLIR A300-615 Infrared Cameras Boston MA, USA — FLIR’s A300-A315 targets safety and automation applications where networking capabilities and compliance with networking protocols is of essence. The camera can be installed discretely almost anywhere to monitor your business and is ideal for any industry where fire prevention, critical vessel monitoring and …

Joint International Symposium on Temperature, Humidity, Moisture and Thermal Measurements in Industry and Science

May 20, 2010 Applications

TEMPMEKO & ISHM 2010 – 31 May-4 June 2010 – Portorož, Slovenia The first Joint International Symposium on Temperature, Humidity, Moisture and Thermal Measurements in Industry and Science will be held in Portorož, Slovenia, located on the Slovenian coast on the Adriatic sea. It will be THE major event for temperature, thermal, humidity …

DTS: The Motor for Tunnel Innovation & Safety in Croatia

April 30, 2010 Applications

LIOS Technology & Tehnomobil’s new standard for fire safety solutions in Croatian tunnel network The Brinje (Tunnel) & Others, Croatia — Tunnels are sensitive traffic bottlenecks and consequently extraordinary vulnerable in case of accidents or fire blasts. Danger for life and enormous economic consequences ask also for technical solutions of prevention and limitation of damage. [...]

TempSys Receives Accreditation for Temp & Humidity Calibration

April 10, 2010 Bio-Medical

Accreditation by the American Association for Laboratory Accreditation (A2LA). Kensington CA, USA – The staff at TempSys’ calibration department has spent the last half year completing the extensive accreditation process which now ensures compliance to ISO/IEC 17025:2005 General Requirements for the Competence of Testing and Calibration Laboratories. CheckPoint, a wireless temperature monitoring system, is used [...]

Award for Wireless Temp Monitoring Systems Proposal

March 17, 2010 Data Acquisition

From the South Texas Coop – Child Nutrition Program Woodland Hills CA, USA — Green Edge Systems, Inc.receives award for its proposal for Wireless Temperature Monitoring Systems and the iQuality HACCP Hand-Held PDA Inspection System with integrated temperature monitoring by the South Texas Coop – Child Nutrition Program. The award assists the ESC 1 Coop [...]

3 Channel Precision Thermometer for PRTS, TCs & Thermistors

February 5, 2010 Calibration

MicroK provides accuracy of ±0.1PPM (±0.1mK) over entire range UK, USA & Asia Pacific — Isotech has introduced a new type of precision thermometer, that sets world standards for accuracy and stability. Designed for a wide range of highly accurate industrial and scientific calibration applications, the MicroK uses a completely new measurement technique to achieve [...]

← Previous Entries

Next Entries →

Page 2 of 3«123 »