Conforms to EURAMET cg-13 Guidelines
Everett WA, USA ??? Fluke Calibration introduces the 9190A Ultra-Cool Field Metrology Well, a small, lightweight, and accurate dry-block calibrator with best-in-class stability.
The 9190A is ideal for pharmaceutical, biomedical and food processing applications that demand strict quality control and regulatory process compliance, including on-location validation and calibration of RTDs, thermocouples, thermometers, and other temperature sensors.
The 9190A conforms to EURAMET cg-13 guidelines for best measurement practices for temperature dry-block calibrators. This ensures that the 9190A specifications for accuracy, stability, axial (vertical) uniformity, radial (well-to-well) uniformity, loading, and hysteresis have been thoroughly and carefully defined and tested.
It has a wide temperature range (-95 to 140 ??C) to cover the coldest and warmest temperatures required in pharmaceutical, biomedical and food processing applications, operating at ultra-cold temperatures not typically available with a calibration bath.
The 9190A uses no bath fluids, keeping clean rooms clean, making it easier to transport, and delivering faster heating/cooling rates. It offers best-in-class temperature stability (?? 0.015 ??C) for consistent, accurate results.
The 9190A with ???process??? option features 4-20 mA connectors, a reference thermometer input, 4-wire PRT/RTD input with an accuracy of plus-or-minus 0.02 ??C, and a reference sensor control to minimize the effects of the axial gradient when a reference PRT is aligned with short sensors.
For more information about the Fluke Calibration 9190A Ultra-Cool Field Metrology Well, visit: www.flukecal.com/9190A.
To purchase, contact your Fluke Calibration sales representative or call (877) 355-3225.
Contact Fluke Calibration
For more information from Fluke Calibration, visit the Fluke Calibration website or contact:
P.O. Box 9090,
Everett WA, USA 98206-9090,
About Fluke Calibration
Fluke Calibration is a leader in precision calibration instrumentation and software for electrical, temperature, pressure, flow, and RF measurements. Calibration products from Fluke Calibration are found in calibration facilities around the world, including National Metrology Institutes, that demand the highest levels of performance and reliability, backed by state of the art metrology and uncompromising support. They are relied on by quality engineers, calibration technicians, and metrologists to instill confidence in the measurements that are critical to their organizations for quality, safety, reliability, and cost.