TC Reference Meter

The only hand held instrument for all ASTM TCs including Type C

LT-100 2009 smaller
Danville VA, USA –?? EDL???s new hand held microprocessor based LT-100 instrument is designed for high precision temperature measurement applications. This instrument incorporates many features previously found only in much higher priced bench or rack mounted instruments.

We have incorporated a precision cold end reference junction that is designed to accurately compensate for changes in ambient and keep the instrument functioning at its highest accuracy. When the utmost accuracy is required, the internal electronic cold end reference can be set to external and an ice bath used.

EDL’s LT-100 uses a convenient 9V battery that will power the instrument for over 50 hours and a simple wall adapter for long term measurements.

The computer interface is RS232 with a back light and allows you to turn it OFF when it is not needed.

The recommended PC software is Hyper Terminal; it is easy to use and interfaces with other programs easily and efficiently. The data stream includes a time stamp for each record and has a minimum and a maximum reading in all measurement modes.

SPECIFICATIONS:

Input ………………………….. Uncompensated Mini TC jacks
Thermocouple types ……..?? K, J, E, T, R, S, B, N, C
Voltage ………………………. Mv
Cold junction reference …. Internal or External
Channels……………………… Two

Display ……………………….. Full range each TC and ??160.0000Mv
Backlighting ………………… LED panel
Readout ……………………… K, ??C, ??F or Mv
Resolution ………………….. Thermocouple User selectable 1, 0.1, 0.01
………………………………….. Mv User selectable 0.01, 0.001, 0.0001
Functions……………………. Min (Minimum reading), Max (Maximum reading), dif (difference between channels)

Accuracy …………………….<??0.1??C Linearization
………………………………….. <??0.1??C Cold Junction
A/D ……………………………. 24 bit resolution
Update ……………………….. 3HZ
Interface …………………….. RS232
Baud rate ……………………. 19 200

Environmental range…….. 0?? to 50??C and 5% to 95%Rh
Power …………………………. 9Vdc battery and AC adapter
Battery life …………………… >50 hours continuous operation (no??backlighting)
Size ……………………………..11.2 cm wide x 19.1 cm tall x 3.2 cm deep
4.4″ wide x 7.5″ tall x 1.2″ deep
Weight…………………………. 340 grams, 12 ounces
Price …………………………… $825.00

Electronic Development Labs, Inc.
USA Toll-Free: 1-800-DIAL-EDL
EDL Tool & Die
(1-800-342-5335)
244 Oakland Drive
Phone: 434-799-0807
Danville, VA 24540
Fax: 434-799-0847
USA