E+E Humidity Transmitters with Ethernet Interface

Easy Network Integration Now Also via Ethernet

EE310Online — Beside the RS485 interface with Modbus RTU protocol, the EE310 humidity and temperature transmitter and the EE360 moisture in oil transmitter now also feature an Ethernet interface with Modbus TCP protocol.

The interface settings can be performed with a PC using the free configuration software or directly on the device via display and push buttons.

The Ethernet module features Power over Ethernet (PoE) and an IP65 rated RJ45 connector.

As a standard, the transmitters offer two voltage or current outputs. The optional interface modules are available also for retrofitting.

Multi-Functional Display with Data Logger

A 3.5″ TFT colour display provides a comprehensive overview of the measurement task and allows the user to perform all settings directly on the device. An integrated data logger stores up to 20,000 values per measurand.

Service-Friendly Design

The modular IP65 enclosure facilitates installation and maintenance. The active part of the device, which accommodates the electronics and the probe, can be replaced within seconds.

https://www.epluse.com/en/products/humidity-instruments/industrial-humidity-transmitters/ee310/.

E+E Elektronik is a Sensor specialist for humidity sensors, CO2 sensors, moisture in oil, dew point, air velocity, flow and temperature sensors.

E+E Elektronik GmbH
Langwiesen 7
A-4209 Engerwitzdorf
Austria

T: +43 7235 605-0
F: +43 7235 605-8
E: info@epluse.at
W: https://www.epluse.com