Oven Monitoring System For Powder Coaters

Wireless Temperature Profiling System at USB Prices

THE BOX from Advanced Temperature Monitoring Systems (ATMS) gives you the ability to ensure your powder is cured while maximizing your oven efficiency.

Improving oven efficiency can help you save time and increase profits.

THE BOX is easy to use and easy to maintain. Turn on your switch, plug in your probes, open your software and your ready to get going.

You can actually powder coat with the probes already in place and it doesn’t hurt a thing, as the powder is easily removable.

ATMS software is designed for real time temperature monitoring. Their software is designed to help you make informed decisions real time before the part comes out of the oven.

Included in the purchase of THE BOX

  • Thermal barrier with 8 channel wireless temperature transmitter
  • Wireless receiver
  • 6 Welded probes (Type-K thermocouple wire that is special limits of error ANSI MC96.1 +/- 4% or 1.1 ºC)
  • Software, The software manual can be downloaded from the website as well as new software upgrades no charge.
  • Warranty – 3 years on THE BOX, 1 year for probes


  • 8 Channels
  • Accuracy +/- 0.3 ºC (+/-.05 ºF)
  • Cold junction compensation
  • 5 sec to 1 hr sampling times
  • Uses 3 AA batteries
  • At 5 second sampling intervals, battery life is approximately 42 hrs with 2800 mAh Ni-MH batteries
  • The internal circuit board’s temperature should be kept below 135 ºF with 150 ºF maximum
  • The maximum sustained temperature of THE BOX is 475 ºF with short term temperatures of 500 ºF. Absolute maximum temperature 500 ºF
  • Over 4 hours of run time @ 400 ºF oven temperature before the electronics reach 135 ºF
  • Type-K thermocouples (special limits of error ANSI MC96.1 +/- 4% or 1.1 ºC)
  • Certification – THE BOX is ISO 9002 certified by an independent facility CATLab
  • Windows compatible 32 and 64 bit versions of Windows XP, Vista, 7, 8, 10
  • Dimensions 6.5? x 8? x 14.3?
  • Weight approximately 16.5 lbs
  • Silicon Free Design


Built by powder coaters for powder coaters!

Learn more about the ATMS ‘THE BOX’ in this PDF file: ATMS OVEN OPTIMIZATION

Advanced Temperature Monitoring Systems is focused on helping powder coaters optimize their curing ovens by providing real time monitoring solutions.

Advanced Temperature Monitoring Systems
232-C Industrial Way Drive
Kernersville, NC 27284 USA

Phone: 336.644.4172
Email: info@thebox4pc.com
Website: www.thebox4pc.com