Environmental monitoring just got better
On the sensorProbe SP2+ the buzzer is located behind the chrome grille, on the sensorProbe SPX+ you will see a small hole marked buzzer on the front panel.
The buzzer is configured from the user interface, and can be used to alert when sensors are in critical or warning conditions.
If you are using the AKCP RFID Swing Handle Cabinet Lock, use the buzzer as an alert to tell the user when the door is unlocked and access is granted.
Buzzer beeping behavior with the Swing Handle Lock
- Door Open / Access Granted: 2 short Beeps
- Access Denied: 2 long Beeps
- Door Closed: 1 short Beep
- Lock Jammed: 1 Long Beep
- Door Held Open: Continuous short beeps
- Door Forced Open: Continuous long beeps
- Sensor Error: Continuous longer beeps
AKCP established in the USA in 1981, created the market for networked temperature, environmental and power monitoring solutions. Today with over 100 employees and 130,000 installations, AKCP is the world’s oldest and largest manufacturer of SNMP enabled networked sensors for the data center.
121/39, 9th Floor, RS Tower Building,
Din Daeng, Bangkok 10400
Phone : +66-2-642-3902
E-mail : email@example.com and/or firstname.lastname@example.org